How Much Does Appliance Repair Cost?

Find out the standard cost of hiring professional appliance repair from Five Star Yakima Appliance Repair:

Kitchens are full of large electrical appliances. An electrical stove, dishwasher or refrigerator requires the right wiring. If an appliance is incorrectly installed, it will pose a serious chance of starting a fire. To be sure your electrical appliances are in good order, it’s important to call a trained service for Yakima appliance repair.

DIY electrical troubleshooting for appliances is not a good idea. There are one or two minor repairs where DIY is be a consideration. In those instances, be sure to use the right tools and to always shut off the power.

Troubleshooting larger appliances, however, is more difficult. Don’t attempt DIY repair. Your range, for one example, might require either a 250- or 125-volt circuit whether it’s electrical or gas-powered, plus you will want no less than two 20-amp, 125-volt circuits to operate small types of household appliances. These circuits are able to carry multiple electrical outlets, just don’t overload them — which often means, a third outlet is necessary.

The risk of a short (which could cause serious injury or death) during any kind of larger job in most cases will not be worth it. It’s best to call a professional service in Yakima, Washington.

You will want to search for appliance repair services in Yakima on the internet. Find businesses with several customer reviews. Or find a a referral from a coworker if you’re having problems with a stove, microwave or refrigerator.

Hiring professional appliance repair technicians starts with finding a contractor in Yakima with experience performing repair of kitchen appliances. Some companies are appliance-specific, and don’t offer repair for all appliances.

The single reason several local appliance repairmen aren’t safe to repair a kitchen appliance is because of the number of electrical appliances that use water to run. Most refrigerators require water to make ice and dishwashers always require water to run. Water is potentially dangerous when it comes to electrical repairs.

If electrical work is not completed correctly and waterlines rupture, as an example, there is a good possibility of electrocution. Water and electricity do not go well together.

And you want a Yakima contractor who knows how to deal with both.

Well trained appliance repairmen can charge in the neighborhood of $40 to $75 an hour for repairs, and independent contractors might cost between $70 and $120 an hour. This might seem like too much, but it is much better to pay a higher price for high-quality work. If a “professional” costs cheaper than $35 per hour, be suspicious.

You should be sure the contractor is in possession of a permit from Yakima for any type of electrical work. Some low-quality services will try to convince you that they don’t need a permit, but don’t believe it. Always check with Yakima officials.

Most technicians in Yakima will charge a small cost for their time, from $50 to $65. You’ll pay the full fee regardless of if the repair is completed, so it’s smart to have a list available of appliances for the company to troubleshoot.

The average is $150 for dishwasher repairs – services in Yakima sometimes charge $80 to $140 per hour. You should expect a $50 to $80 trip charge too for them to drive and troubleshoot the problem.

The prices for brand new kitchen appliances can range between $325 and $7,500. The wide range depends the kind of kitchen appliance, such as a high-price refrigerator compared to a low-cost oven.

Fixing or installing an electrical kitchen appliance is among the most difficult repair projects you can complete in a home.

One way to sidestep these types of electrical issues is listening attentively to a contractor when he completes an estimate for service. Exact types of wire need to be used dependent on the type of appliance, and the wiring colors (for ground or neutral) could differ when regulations and requirements are revised.

Additionally, most jurisdictions require arc fault protection for all kitchen electrical circuits plus ground fault circuit interruption (GFCI) protection. If the technician fails to mention this, or implies that you don’t really “need” them, we recommend to hire a different service.

In addition, be sure to monitor a contractor attentively as he or she completes the first inspection of the dishwasher. If it’s a brand new kitchen appliance he is going to install, ask if it is able to use the exact same circuit or if it needs an enhancement because there are major size and power usage differences in the most recent models. The same recommendation applies to dishwashers and ranges.

A professional should be willing to convey what it is they will do, why they need to do it and highlight each piece of the final fee, which likely includes materials, labor and sometimes miscellaneous. Some appliance repair companies willing to wave the service fee if service is completed.

OTHER RESOURCES:

Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts